Hot Rod Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
977 Posts
It looks like a cheap import crank and generic cam. Basically it's going to be like a box of cracker jacks, don't know how good the prize will be until you open the box and check it out.Some people have had good luck with this type of stuff, while others have had quite a time getting these cranks straight, round and in balance.
 

·
Registered
Joined
·
1,418 Posts
I dont know.
There feedback is 99% on over 6000 sales so somone must be happy.
Id say it would fine. The Hyper pistons will limit any nitrous or blower use, but other than that it should be fine. Im using the PAW cam on mine, so Im going to try the unnorm, but thats me.
Id say OK.
Call me punk, Im wanting to hit Summit. Hg
 

·
Registered
Joined
·
104 Posts
Kit

Most of the parts in the Kit are good, and should be fine for a engine combination up to 400 HP. Quality machine work and exacting measurements of the block are the foundation to the intire recipe.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top