Hot Rod Forum banner
1 - 2 of 2 Posts

·
High Performance Rear Ends
Joined
·
3,782 Posts
Depends on what you call a good 9 inch. A good 9 inch to me would be around $2800. That gets you a nodular case with a Daytona pinion housing, 31 spline axles, a Dura Grip or Detroit Locker and a new heavy duty housing. Almost any 9 inch that you get from a salvage yard or out of something old is going to need a complete rebuild, and it's probably going to have 28 spline axles and a standard differential. Figure on at least $400 for the rebuld and another $900 or more to replace the axles and differential.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top