Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3,441 Posts
Not that I am extremely experienced at this, but I usually dust a light coat over the panel right after the last full coat. I read in some book that this can help when using high metallics.

Chris
 

·
Registered
Joined
·
3,441 Posts
Funny you mention the bad blends running around. I can always see it, but noone else I know seems to notice. I think those of use who have done some painting get a eye for things like that.

Chris
 

·
Registered
Joined
·
3,441 Posts
I thought that the fog thing would cause orange peel also, but it doesnt IF you use a slow reducer. That is key. A slow reducer will allow it to melt in to the existing coat before it drys and causes the orange peel. I would also check the pressure on your gun to make sure it is totally atomized.

Chris
 
1 - 3 of 3 Posts
Top