Hot Rod Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
I'm building a replica h1 hummer. I need to get window channel molding and felt for the doors. I've looked at Soffseal, Precision, StanPro and nobody makes anything even close. My channel is 5/8" wide and 9/16" deep. The door has a lip on both sides of the glass for felt to be pushed on to. I'll post some pictures at my web site. www.ltw.net/windows this week end.
 

·
Premium Member
Joined
·
4,097 Posts
Metro is another good place to look.
http://www.metrommp.com/

Look at the "universal" parts heading, then "window channels and sweepers".

You will find stuff like this :thumbup:


Later, mikey
 

·
Registered
Joined
·
11 Posts
Discussion Starter #6
Thanks Guys,

I haven't found any one yet that has 5/8" x 5/8". I'll keep looking.

This is a Urban Gorilla. Same as is on Xtreme4x4. Watch the show on Feb 11 and 17.
 

·
Premium Member
Joined
·
4,097 Posts
I thought you said 5/8 X 9/16?

Try Sommer and Maca or CR lawrence.
You will need to create an account on both sites, as they don't usually sell to the general public.

http://www.somaca.com/DefaultG.asp

http://www.crlaurence.com/ProductPages/showLine.asp?GroupID=4414&Path=::4375::4414

Here is some more of the stuff that cr lawrence has.
http://www.crlaurence.com/ProductPages/showLine.asp?GroupID=4375&Path=::4375

If those guys don't have it, and it isn't an OEM piece then it probably isn't made. I can't imagine that the guys building those hummers would have specified something custom for window channels.

Later, mikey
 

·
Registered
Joined
·
11 Posts
Discussion Starter #8
Thanks Mikey,

I did say that the first time didn't I. The depth is 9/16 to the top of the channel. If I can, I'd like for it to be 5/8, that way it sticks out a little and can give me some more glass contact.

I'll try the other places.
 
1 - 8 of 8 Posts
Top