Hot Rod Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I have the aluminum frame for the car just about complete. I will have pictures soon. The front end is going to be titanium independent a arms. I have an argon purge box to tig weld all the small titanium parts. Thats the best way to weld this metal without any oxygen hurting the joints. All parts are ndt tested to make sure there are no flaws. The rear independent parts are planned. All the parts are being laser cut at the local cut shop.I'm using 33 spined axels and a ford nine" center .The rest is titanium. Tig Welder
 
1 - 3 of 3 Posts
Top