cubic inches and HP of rebuilt 350 engine with bore of .040

dannyessexc · Apr 5, 2009

hello, i just got my 350 vrotec rebuilt with stock parts except for the cam its a 458 lift comp cam. the engine was bored .040 over, not much. i was wondering what the cubic inches changes to?? the computer is still stock will change chip ASAP! what is the estimated HP/TRQ i should have before CP Chip is installed and what could it be after the new chip(with all the modifications i have done)??
modifications: K&N air filter ram air induction/cold air, pace setter headers(2"-2.5") duals, hooker muffs. cam specs are; duration intake 206 and exhaust 210, lobe lift intake .3060 and exhaust .3050, lobe separation 111.0
thanks

DoubleVision · Apr 5, 2009

357 cubic inches. I can`t give power estimates on sketchy detail. Head flow, compression ratio and many other varibles come into play. Without knowing what year your engine is I don`t know what it came with from the factory. With the parts you`ve added might give it 20 more horses and 35 more ft lbs of torque.

dannyessexc · Apr 5, 2009

Sir

it is 1998 engine, rebuilt 2weeks ago and we did a compression test on #2 port it was 145 on 1stblow. i had bad injector and was troubleshooting thats why i did test, but dont know exact compression. if you could tell me how to get the specs. you need i will. not a performance person so its like French to me...lol

GunnerTHB · Apr 5, 2009

I would assume he's talkin about a 350 Vortec, and if I remember correctly isn't the static compression 9.4?

dannyessexc · Apr 5, 2009

yea vortec and i couldnt tell you about the compression, (don't have clue, i am learning on every question) thanks

cubic inches and HP of rebuilt 350 engine with bore of .040

Top Contributors this Month

Recommended Communities