Hollys usually have the code for the carb on the front side of the choke housing. Heres their site for referance.
http://www.holley.com/HiOctn/TechServ/TechInfo/TechInfo.html

 

On this housing... I see "C44F", "9510" and "2882". This is just on the front carb... on the middle, the "2882" reads "2881". Also, if I look down on the main body, there is a 4 digit number that is different on all 3 carbs. They are(from front to back): 4516, 5673, 5563.

Fella's, I'm lost here.

 

the 9510 is the Ford # for carbs, it must be a factory set-up. The 4 digit is the one you are probably looking for. There is a website that specifically deals with Ford trip set-ups, I can't seem to find it in my favorites right now but it's something like gerecanyon.com

 

Woodz:

You're close: <a href="http://www.gerlecreek.com/" target="_blank">http://www.gerlecreek.com/</a>

 

yea, I just went to post it,I posted it a few weeks back and don't know why I couldn't find it. It didn't help that it sounds nothing like what it's about.

 

Go to Recarbco Carburetor Co's web site at <a href="http://www.recarbco.com" target="_blank">www.recarbco.com</a> and email them those numbers and they can most likely help you identify those carbs.

 

Did you find the information you were looking for?

 

I love those old parts catalogs, especially the prices!

 

KULTULZ:

Nicely done!

As you can see by my avatar, I have the same catalog. But mine must be a little earlier since the price is $210.55 in mine (original 1965).

I'll take three at that price please.

 

How much would the 6 pack setup below be worth used?

Would the setup below provide more/less/same amount of HP as a new Holley 600CFM 4 gun with a dual plane intake?

 

Good question... If I wanted to try and sell a ford tri-power carb setup with intake, what should I be looking get for it?

 

Go to the URL mstngjoe gave you and you will get a basic idea of what it is worth.

DON'T GIVE IT AWAY!

...unless it is to me...

 

The first tripower I saw was for $1500 That don't seem right, is it?

 

I've seen reconditoned/repop complete setups go for $1800. The price you get may vary depending upon condition/completeness and the need to rebuild the carbs.