38s will work ok

 

Try this. http://www.ringpinion.com/Calc_RPM.aspx

 

How much lift do you have on it now and what are you thing on with the lift?
Is it your D/D? or just a play toy?

Cole

 

It actually doesn't have a lift on it but it's already pretty tall for stock but when I get money I plan on maybe getting a 4inch at most...cause yes it is my daily driver, but I would like to take it out every now and then for some fun

 

tires

you might be able to squeez 33s without the lift but the gears you have will work best with 35s but if you wanted 38 would be ok.

 

I would do 35's or 36's with a 4 inch lift. I had a 79 Chevy 4x4 halfton a while back with 36 inch tires and 3.07 gears , but took out the 350 and put in a 454. That combo worked great for me, more torque not lower gears.

 

33" BFG's with 4-inch lift. Was using the original 3.08's. Like the others suggested 36-38" with your 4.10's should be good.

 

go big or go home..lol...IMO.....but seriously, with 4.10s you can run 38" like nothhing...as for a daily drive, 33-12.50-15, nice looking tire...

remember a truck looks better with the fender wells fulll then a truck 20 feet off the ground and diffs draging...IMO