Probably not.

Do you have the 81 (Aluminum case) Chevy A833 or the 82-87 (Cast iron case) Chevy A833? Is it 2wd or 4x4?

I have both versions in 2wd, and may be getting a 4x4 cast iron version today from the swap meet. Without looking I don't know if any of them have shifters still on them.

Be super careful with your transmission when you handle it. If you break the front bearing retainer, you will not be able to replace it. Both of mine were sold years ago and I have not been able to find ANY replacements.

 

4spd



that trans was made by a division of chrysler.had 1 in a 1995 gm pickup,it is defently a truck trans and not a nice shifting ,but strong enough.the truck trans and the trotle bodeyed injection 350 was a vehicle i will not miss.

 

Aluminum Case

MMerlin, I have the all aluminum case 2WD unit that is complete except the shifter. I noticed the Chrysler mounting plate is different than the GM version, looks lower and the GM version is quite higher. If all else fails, I'll fabricate the mounting plate and try to make a Hurst Shifter work.
Thanks

 

Here's a link you might find interesting.
http://67-72chevytrucks.com/vboard/showthread.php?t=574221

 

The OEM shifter was made by Hurst. 833s in general were not the fastest shifting gearboxes. I would contact Jamie Passon; he does a lot of 833 boxes and used to deal in the OD parts as well. He may have an OEM chevy shifter kicking around he'd be happy to move.

 

Thanks for the link and info to contact Jamie. I will get with him and Music man on the forum for shifter info

 

I checked my transmissions. The aluminum box is missing the shifter.