I've had no luck locating appropriate-looking 5-wire power window switches for my 1939 Plymouth Phaeton. I only need four switches in the center of the dash and none for the back seat or right side passenger.
A1 Electric has some kits with black anodized aluminum switches that would almost be OK with me. But I don't need the extra expense of the wiring harness (wires are already there).
There are these, and two kits would be $260, and there are some plastic switches (two kits at $76 total) but they look too modern as do the billet switches.
The old GM square switches just don't look right.
Everything else I find seems to be modern plastic or shiny billet (which never looks right on a resto-mod car). I am also unable to use those nifty switches that replace the window crank, plus they don't allow the driver to easily work all four windows.
So I'm open to suggestions. Thanks!
A1 Electric has some kits with black anodized aluminum switches that would almost be OK with me. But I don't need the extra expense of the wiring harness (wires are already there).
There are these, and two kits would be $260, and there are some plastic switches (two kits at $76 total) but they look too modern as do the billet switches.
The old GM square switches just don't look right.
Everything else I find seems to be modern plastic or shiny billet (which never looks right on a resto-mod car). I am also unable to use those nifty switches that replace the window crank, plus they don't allow the driver to easily work all four windows.
So I'm open to suggestions. Thanks!
